What is the adjustment before the operation of the capsule filling machine?
The capsule filling machine is optimized in combination with the characteristics of traditional Chinese medicine and the requirements of GMP. It has the advantages of compact structure, small machinery, low noise, accurate filling dose, complete functions, and stable operation. It can simultaneously complete capsule seeding, sub-capsule, filling, It is the most ideal hard capsule filling equipment for manufacturers of medicines and health products.
The main working principle of the capsule filling machine is that when the machine is running, the capsules in the capsule hopper will vertically enter the first delivery fork of the dispensing device one by one. When the first delivery fork moves downwards once, six capsules will be delivered, and the rubber cap will be on top. In the first job, the vacuum separation system slides the capsule into the module and separates the body cap at the same time. When the turntable rotates intermittently to the second work, the upper meter quickly rises and moves inward, and the compacted grain is pushed into the capsule of the lower module at the fifth work filling rod, and the undivided capsule is on the eighth work. exclude. The upper and lower modules are combined together at the tenth work position, and the lower capsule body is pushed upward to make it buckle. At the eleventh work position, the buckled capsule product is pushed out and collected. In the twelfth station, the vacuum cleaner enters the next cycle after cleaning the module. The grain is filled and compacted five times in an intermittently rotating metering plate.
First, turn on the power of the capsule filling machine. Check that all security settings are properly equipped and adjusted. Without capsules and powder, use the handwheel to turn the machine in the direction of rotation for 1-3. After seeing it as normal, put the capsule and the powder into the capsule hopper respectively, and the height of the powder hopper into the powder hopper should be 60mm lower than the highest position of the container. At the same time, there should be more than half of the powder in the metering and distribution room. Adjust the filling rod's preset insertion depth into the metering plate. After everything is adjusted, press the host to jog, and the switch can be started after the jog is normal. Speed adjustment is carried out when the main motor is running.
